How to Install MosChip MCS9805CV Driver for Windows XP
If you have a PCI parallel port card with a MosChip MCS9805CV chipset, you may need to install a driver to make it work properly on Windows XP. The MCS9805CV is a printer port controller that supports Centronics, PS/2, EPP, and ECP modes. Here are the steps to install the driver:
Download the driver file from this link. The file name is Driver_WHQL.zip and it is about 2.5 MB in size.
Extract the zip file to a folder on your computer. You will see a folder named Driver_WHQL with several files inside.
Insert the PCI parallel port card into an available PCI slot on your computer and turn on the power.
Windows XP will detect the new hardware and launch the Found New Hardware Wizard. Select \"No, not this time\" and click Next.
Select \"Install from a list or specific location (Advanced)\" and click Next.
Select \"Search for the best driver in these locations\" and check the box for \"Include this location in the search\". Click Browse and navigate to the folder where you extracted the driver files. Click OK and then Next.
Windows XP will find the driver for MosChip PCI Multi-IO Controller and install it. Click Finish when done.
Repeat steps 4 to 7 for each device that Windows XP detects under MosChip PCI Multi-IO Controller, such as MosChip PCI Parallel Port, MosChip PCI Serial Port, etc.
Restart your computer to complete the installation.
You can now use your PCI parallel port card with any device that supports parallel port communication, such as printers, scanners, etc.
Troubleshooting MosChip MCS9805CV Driver Issues
Sometimes, you may encounter some problems with the MosChip MCS9805CV driver on Windows XP, such as device not migrated, device not working properly, device not detected, etc. Here are some possible solutions to fix these issues:
Make sure you have downloaded and installed the correct driver for your device and operating system. You can check the device ID and driver version in the Device Manager.
Make sure your PCI parallel port card is securely inserted into the PCI slot and the power is on.
Make sure your parallel port device is connected to the PCI parallel port card and turned on.
Try a different PCI slot or a different parallel port device to rule out any hardware issues.
Try uninstalling and reinstalling the driver in the Device Manager. You may need to restart your computer after this step.
Try updating the driver from the Device Manager or from the manufacturer's website. You may need to restart your computer after this step.
If none of the above steps work, you may need to contact ASIX Electronics support team for further assistance. You can find their contact information at this link.
Hope this helps you to resolve any issues with the MosChip MCS9805CV driver on Windows XP. aa16f39245