How to Download and Use ODIN 1.3.7 by secr9tos
How to Download and Use ODIN 1.3.7 by secr9tos
ODIN 1.3.7 by secr9tos is a tool that allows you to flash custom firmware on your Samsung devices. It is compatible with various models and versions of Android. You can use it to install custom ROMs, root your device, or fix software issues.
ODIN 1.3.7 by secr9tos download
In this article, we will show you how to download and use ODIN 1.3.7 by secr9tos safely and easily.
Step 1: Download ODIN 1.3.7 by secr9tos
You can download ODIN 1.3.7 by secr9tos from the link below:
ODIN 1.3.7 by secr9tos (Final 2022)
This is a verified and trusted source that provides the latest version of the tool.
After downloading the file, extract it to a folder on your computer.
Step 2: Prepare your device
Before you use ODIN 1.3.7 by secr9tos, you need to prepare your device for flashing.
Backup your data: Flashing custom firmware will erase all your data on your device, so make sure you have a backup of your important files and settings.
Enable USB debugging: Go to Settings > Developer options > USB debugging and turn it on. If you don't see Developer options, go to Settings > About phone > Software information and tap on Build number seven times.
Charge your battery: Make sure your device has at least 50% battery level before flashing.
Download the appropriate firmware: Depending on your device model and region, you need to download the correct firmware file for your device. You can find the firmware files from various sources online, such as Sammobile or Updato. Make sure the firmware file is compatible with ODIN 1.3.7 by secr9tos and has the .tar or .tar.md5 extension.
Step 3: Launch ODIN 1.3.7 by secr9tos
After you have downloaded and prepared everything, you can launch ODIN 1.3.7 by secr9tos on your computer.
Run the ODIN.exe file as administrator.
You will see a window with various options and buttons.
Do not change any settings unless you know what you are doing.
The only thing you need to do is click on the AP button and browse for the firmware file you downloaded earlier.
The file name will appear in the AP box.
Step 4: Connect your device
The next step is to connect your device to your computer using a USB cable.
Before you do that, you need to put your device in download mode.
You will see a warning screen asking you to press Volume Up to continue or Volume Down to cancel.
Press Volume Up to enter download mode.
You will see a screen with a green Android logo and a message saying "Downloading... Do not turn off target".
Now connect your device to your computer using a USB cable.
If everything is done correctly, ODIN 1.3.7 by secr9tos will detect your device and show a blue box with a COM port number in the upper left corner of the window.
If not, make sure you have installed the correct drivers for your device and try again.
Step 5: Start flashing
The final step is to start flashing the 0efd9a6b88